title: A NuSTAR view of powerful gamma-ray loud blazars

abstract: We observed with the NuSTAR satellite 3 blazars at z>2, detected in gamma-rays by Fermi/LAT and in the soft X-rays, but not yet observed above 10 keV. The flux and slope of their X-ray continuum, together with Fermi/LAT data allows us to estimate their total electromagnetic output and peak frequency. For some of them we can study the source in different states, and investigate the main cause of the observed different spectral energy distribution. We then collected all blazars at redshift greater than 2 observed by NuSTAR, and confirm that these hard and luminous X-ray blazars are among the most powerful persistent sources in the Universe. We confirm the relation between the jet power and the disk luminosity, extending it at the high energy end.


title: Early detection of sepsis utilizing deep learning on electronic health record event sequences

abstract: The timeliness of detection of a sepsis event in progress is a crucial factor in the outcome for the patient. Machine learning models built from data in electronic health records can be used as an effective tool for improving this timeliness, but so far the potential for clinical implementations has been largely limited to studies in intensive care units. This study will employ a richer data set that will expand the applicability of these models beyond intensive care units. Furthermore, we will circumvent several important limitations that have been found in the literature: 1) Models are evaluated shortly before sepsis onset without considering interventions already initiated. 2) Machine learning models are built on a restricted set of clinical parameters, which are not necessarily measured in all departments. 3) Model performance is limited by current knowledge of sepsis, as feature interactions and time dependencies are hardcoded into the model. In this study, we present a model to overcome these shortcomings using a deep learning approach on a diverse multicenter data set. We used retrospective data from multiple Danish hospitals over a seven-year period. Our sepsis detection system is constructed as a combination of a convolutional neural network and a long short-term memory network. We suggest a retrospective assessment of interventions by looking at intravenous antibiotics and blood cultures preceding the prediction time. Results show performance ranging from AUROC 0.856 (3 hours before sepsis onset) to AUROC 0.756 (24 hours before sepsis onset). We present a deep learning system for early detection of sepsis that is able to learn characteristics of the key factors and interactions from the raw event sequence data itself, without relying on a labor-intensive feature extraction work.


title: Shear-induced contact area anisotropy explained by a fracture mechanics model

abstract: This paper gives a theoretical analysis for the fundamental problem of anisotropy induced by shear forces onan adhesive contact, discussing the experimental data of the companion Letter. We present a fracture mechanicsmodel where two phenomenological mode-mixity functions are introduced to describe the weak couplingbetween modes I and II or I and III, which changes the effective toughness of the interface. The mode-mixityfunctions have been interpolated using the data of a single experiment and then used to predict the behavior of thewhole set of experimental observations. The model extends an idea by Johnson and Greenwood, to solve purelymode I problems of adhesion in the presence of a nonaxisymmetric Hertzian geometry, to the case of ellipticalcontacts sheared along their major or minor axis. Equality between the stress intensity factors and their criticalvalues is imposed solely at the major and minor axes. We successfully validate our model against experimentaldata. The model predicts that the punch geometry will affect both the shape and the overall decay of the shearedcontact area.


title: Black hole quantum atmosphere for freely falling observers

abstract: We analyze Hawking radiation as perceived by a freely-falling observer and try to draw an inference about the region of origin of the Hawking quanta. To do so, first we calculate the energy density from the stress energy tensor, as perceived by a freely-falling observer. Then we compare this with the energy density computed from an effective temperature functional which depends on the state of the observer. The two ways of computing these quantities show a mismatch at the light ring outside the black hole horizon. To better understand this ambiguity, we show that even taking into account the (minor) breakdown of the adiabatic evolution of the temperature functional which has a peak in the same region of the mismatch, is not enough to remove it. We argue that the appearance of this discrepancy can be traced back to the process of particle creation by showing how the Wentzel--Kramers--Brillouin approximation for the field modes breaks down between the light ring at $3M$ and $4M$, with a peak at $r=3.3M$ exactly where the energy density mismatch is maximized. We hence conclude that these facts strongly support a scenario where the Hawking flux does originate from a "quantum atmosphere" located well outside the black hole horizon.


title: Energy balancing using charge/discharge storages control and load forecasts in a renewable-energy-based grids

abstract: Renewable-energy-based grids development needs new methods to maintain the balance between the load and generation using the efficient energy storages models. Most of the available energy storages models do not take into account such important features as the nonlinear dependence of efficiency on lifetime and changes in capacity over time horizon, the distribution of load between several independent storages. In order to solve these problems the Volterra integral dynamical models are employed. Such models allow to determine the alternating power function for given/forecasted load and generation datasets. In order to efficiently solve this problem, the load forecasting models were proposed using deep learning and support vector regression models. Forecasting models use various features including average daily temperature, load values with time shift and moving averages. Effectiveness of the proposed energy balancing method using the state-of-the-art forecasting models is demonstrated on the real datasets of Germany's electric grid.


title: The Boltzmann equation with an external force on the torus: Incompressible Navier-Stokes-Fourier hydrodynamical limit

abstract: We study the Boltzmann equation with external forces, not necessarily deriving from a potential, in the incompressible Navier-Stokes perturbative regime. On the torus, we establish local-in-time, for any time, Cauchy theories that are independent of the Knudsen number in Sobolev spaces. The existence is proved around a time-dependent Maxwellian that behaves like the global equilibrium both as time grows and as the Knudsen number decreases. We combine hypocoercive properties of linearized Boltzmann operators with linearization around a time-dependent Maxwellian that catches the fluctuations of the characteristics trajectories due to the presence of the force. This uniform theory is sufficiently robust to derive the incompressible Navier-Stokes-Fourier system with an external force from the Boltzmann equation. Neither smallness, nor time-decaying assumption is required for the external force, nor a gradient form, and we deal with general hard potential and cut-off Boltzmann kernels. As a by-product the latest general theories for unit Knudsen number when the force is sufficiently small and decays in time are recovered.


title: Deep Learning based Cephalometric Landmark Identification using Landmark-dependent Multi-scale Patches

abstract: A deep neural network based cephalometric landmark identification model is proposed. Two neural networks, named patch classification and point estimation, are trained by multi-scale image patches cropped from 935 Cephalograms (of Japanese young patients), whose size and orientation vary based on landmark-dependent criteria examined by orthodontists. The proposed model identifies both 22 hard and 11 soft tissue landmarks. In order to evaluate the proposed model, (i) landmark estimation accuracy by Euclidean distance error between true and estimated values, and (ii) success rate that the estimated landmark was located within the corresponding norm using confidence ellipse, are computed. The proposed model successfully identified hard tissue landmarks within the error range of 1.32 - 3.5 mm and with a mean success rate of 96.4%, and soft tissue landmarks with the error range of 1.16 - 4.37 mm and with a mean success rate of 75.2%. We verify that considering the landmark-dependent size and orientation of patches helps improve the estimation accuracy.


title: Matheuristic algorithms for the parallel drone scheduling traveling salesman problem

abstract: In a near future drones are likely to become a viable way of distributing parcels in a urban environment. In this paper we consider the parallel drone scheduling traveling salesman problem, where a set of customers requiring a delivery is split between a truck and a fleet of drones, with the aim of minimizing the total time required to service all the customers. We present a set of matheuristic methods for the problem. The new approaches are validated via an experimental campaign on two sets of benchmarks available in the literature. It is shown that the approaches we propose perform very well on small/medium size instances. Solving a mixed integer linear programming model to optimality leads to the first optimality proof for all the instances with 20 customers considered, while the heuristics are shown to be fast and effective on the same dataset. When considering larger instances with 48 to 229 customers, the results are competitive with state-of-the-art methods and lead to 28 new best known solutions out of the 90 instances considered.


title: On Pattern Setups and Pattern Multistructures

abstract: Modern order and lattice theory provides convenient mathematical tools for pattern mining, in particular for condensed irredundant representations of pattern spaces and their efficient generation. Formal Concept Analysis (FCA) offers a generic framework , called pattern structures, to formalize many types of patterns, such as itemsets, intervals, graph and sequence sets. Moreover, FCA provides generic algorithms to generate irredundantly all closed patterns, the only condition being that the pattern space is a meet-semilattice. This does not always hold, e.g., for sequential and graph patterns. Here, we discuss pattern setups consisting of descriptions making just a partial order. Such a framework can be too broad, causing several problems, so we propose a new model, dubbed pattern multistructure, lying between pattern setups and pattern structures, which relies on multilattices. Finally, we consider some techniques , namely completions, transforming pattern setups to pattern structures using sets/antichains of patterns.


title: Planar sampling sets for the short-time Fourier transform

abstract: This paper considers the problem of restricting the short-time Fourier transform to domains of nonzero measure in the plane and studies sampling bounds of such systems. In particular, we give a quantitative estimate for the lower sampling bound in the case of Hermite windows and derive a sufficient condition for a large class of windows in terms of a certain planar density. On the way, we prove a Remez-type inequality for polyanalytic functions. MSC2010: 42C40, 46E15, 46E20, 42C15


title: Beamforming and other methods for denoising microphone array data

abstract: Measured acoustic data can be contaminated by noise. This typically happens when microphones are mounted in a wind tunnel wall or on the fuselage of an aircraft, where hydrodynamic pressure fluctuations of the Turbulent Boundary Layer (TBL) can mask the acoustic pressures of interest. For measurements done with an array of microphones, methods exist for denoising the acoustic data. Use is made of the fact that the noise is usually concentrated in the diagonal of the Cross-Spectral Matrix, because of the short spatial coherence of TBL noise. This paper reviews several existing denoising methods and considers the use of Conventional Beamforming, Source Power Integration and CLEAN-SC for this purpose. A comparison between the methods is made using synthesized array data.


title: Normality Criteria for Families of Meromorphic Functions about Shared Functions

abstract: In this paper we prove some normality criteria for a family of meromorphic functions concerning shared analytic functions, which extend or generalized some result obtained by Y. F. Wang, M. L. Fang~\cite{WF} and J. Qui, T. Zhu ~\cite{QZ}.


title: Photonic quadrupole topological phases in zero-dimensional cavity with synthetic dimensions

abstract: Quadrupole topological insulator, which supports robust corner states, has been recently demonstrated in two-dimensional (2D) spatial lattices. Here, we design the first photonic quadrupole topological insulator in fully synthetic spaces with the utilization of 0D optical cavity. The frequency and orbital angular momentum (OAM) of light are used to form the 2D synthetic spaces. Four degenerate polarization states are mapped to the internal lattice sites within the unit cell. By suitably engineering the coupling between cavity modes with different frequencies, OAMs and polarizations, the ideal synthetic quadrupole topological insulators are obtained. By using the robust synthetic corner state, we present the possibility for achieving topological protection of multi-photon entangled states. Our designed synthetic photonic quadrupole topological insulators propose a unique platform to investigate higher-order topological phases in 0D system and possess potential applications in quantum information and communications.


title: Using Data Mining to Explore Calmodulin Bibliography

abstract: In this chapter, we present a strategy and the technics to approach a scientific field from a set of articles gathered from the bibliographic database, Web of Science. The strategy is based on methods developed to analyze social networks. We illustrate the use of such strategy in studying the calmodulin field. Such method allows to structure a huge number of articles when writing a review, to detect the key opinion leaders in a given field and to locate his own research topic in the landscape of the themes deciphered by our own community. We show that the free software VosViewer may be used without knowledge in computing science and with a short learning period. iii.


title: Approximation of exit times for one-dimensional linear and growth diffusion processes

abstract: In order to approximate the exit time of a one-dimensional diffusion process, we propose an algorithm based on a random walk. Such an algorithm was already introduced in both the Brownian context and in the Ornstein-Uhlenbeck context. Here the aim is therefore to generalize this efficient numerical approach in order to obtain an approximation of both the exit time and position for either a general linear diffusion or a growth diffusion. The efficiency of the method is described with particular care through theoretical results and numerical examples.


title: Artificial Intelligence helps making Quality Assurance processes leaner

abstract: Lean processes focus on doing only necessery things in an efficient way. Artificial intelligence and Machine Learning offer new opportunities to optimizing processes. The presented approach demonstrates an improvement of the test process by using Machine Learning as a support tool for test management. The scope is the semi-automation of the selection of regression tests. The proposed lean testing process uses Machine Learning as a supporting machine, while keeping the human test manager in charge of the adequate test case selection. 1 Introduction Many established long running projects and programs are execute regression tests during the release tests. The regression tests are the part of the release test to ensure that functionality from past releases still works fine in the new release. In many projects, a significant part of these regression tests are not automated and therefore executed manually. Manual tests are expensive and time intensive [1], which is why often only a relevant subset of all possible regression tests are executed in order to safe time and money. Depending on the software process, different approaches can be used to identify the right set of regression tests. The source code file level is a frequent entry point for this identification [2]. Advanced approaches combine different file level methods [3]. To handle black-box tests, methods like [4] or [5] can be used for test case prioritiza-tion. To decide which tests can be skipped, a relevance ranking of the tests in a regression test suite is needed. Based on the relevance a test is in or out of the regression test set for a specific release. This decision is a task of the test manager supported by experts. The task can be time-consuming in case of big (often a 4-to 5-digit number) regression test suites because the selection is specific to each release. Trends are going to continuous prioritization [6], which this work wants to support with the presented ML based approach for black box regression test case prioritization. Any regression test selection is made upon release specific changes. Changes can be new or deleted code based on refactoring or implementation of new features. But also changes on externals systems which are connected by interfaces have to be considered


title: On the Ubiquity Of Electromagnetic-Duality Rotations in 4D, N = 1 Holoraumy Tensors for On-Shell 4D Supermultiplets

abstract: Holoraumy is a tool being developed for dimensional enhancement (supersymmetry holography) where the goal is to build higher dimensional supersymmetric multiplets from lower dimensional supersymmetric multiplets. In this paper, for the first time we investigate holoraumy for on-shell supersymmetry. Specifically, the holoraumy tensors for a number of familiar 4D, $\mathcal{N}=1$ multiplets are calculated. It is shown in all of these cases of on-shell theories, the holoraumy is of the form of an electromagnetic duality charge multiplying a composite transformation involving an electromagnetic duality rotation through an angle of $\pi/2$ times a space time translation. The details of our calculations can be found at the HEPTHools Data Repository at https://hepthools.github.io/Data/.


title: Variational Resampling Based Assessment of Deep Neural Networks under Distribution Shift

abstract: A novel variational inference based resampling framework is proposed to evaluate the robustness and generalization capability of deep learning models with respect to distribution shift. We use Auto Encoding Variational Bayes to find a latent representation of the data, on which a Variational Gaussian Mixture Model is applied to deliberately create distribution shift by dividing the dataset into different clusters. Wasserstein distance is used to characterize the extent of distribution shift between the generated data splits. We compare several popular Convolutional Neural Network (CNN) architectures and Bayesian CNN models for image classification on the Fashion-MNIST dataset, to assess their robustness and generalization behavior under the deliberately created distribution shift, as well as under random Cross Validation. Our method of creating artificial domain splits of a single dataset can also be used to establish novel model selection criteria and assessment tools in machine learning, as well as benchmark methods for domain adaptation and domain generalization approaches.


title: On The Weak Consistency of Finite Volumes Schemes for Conservation Laws on General Meshes

abstract: The aim of this paper is to develop some tools in order to obtain the weak consistency of (in other words, analogues of the Lax-Wendroff theorem for) finite volume schemes for balance laws in the multi-dimensional case and under minimal regularity assumptions for the mesh. As in the seminal Lax-Wendroff paper, our approach relies on a discrete integration by parts of the weak formulation of the scheme. This makes a discrete gradient of the test function appear, and the central argument for the scheme consistency is to remark that this discrete gradient is convergent in L $\infty$ weak .


title: Extended Nyquist formula for a resistance subject to a heat flow

abstract: The Nyquist formula quantifies the thermal noise driven fluctuations of voltage across a resistance in equilibrium. We deal here with the case of a resistance driven out of equilibrium by putting it in contact with two thermostats at different temperatures. We reach a non-equilibrium steady state where a heat flux is flowing through the resistance. Our measurements demonstrate anyway that a simple extension of the Nyquist formula to the non uniform temperature field describes with an excellent precision the thermal noise. For a metallic ohmic material, the fluctuations are actually equivalent to those of a resistance in equilibrium with a single thermostat at the mean temperature between the hot and cold sources.


abstract: This paper introduces Task 2 of the DCASE2019 Challenge, titled "Audio tagging with noisy labels and minimal supervision". This task was hosted on the Kaggle platform as "Freesound Audio Tagging 2019". The task evaluates systems for multi-label audio tagging using a large set of noisy-labeled data, and a much smaller set of manually-labeled data, under a large vocabulary setting of 80 everyday sound classes. In addition, the proposed dataset poses an acoustic mismatch problem between the noisy train set and the test set due to the fact that they come from different web audio sources. This can correspond to a realistic scenario given by the difficulty in gathering large amounts of manually labeled data. We present the task setup, the FSDKaggle2019 dataset prepared for this scientific evaluation, and a baseline system consisting of a convolutional neural network. All these resources are freely available.


title: Variational formulation for models of shear shallow water flows and ideal turbulence

abstract: The shallow water equations without shear effects are similar to the gas dynamics equations with a polytropic equation of state. When the shear effects are taken into account, the equations contain additional evolution equations mathematically analogous to those of the Reynolds stresses in turbulent flows of compressible fluids when the source terms are neglected (ideal turbulence). We show that the non-dissipative model of shear shallow water flows and the model of ideal turbulence admit a similar variational formulation where, in the both cases, the equations for the Reynolds stress tensor evolution are considered as non-holonomic constraints.


title: FAKE GUT

abstract: The perfect fit of the matter fields of the Standard Model (SM) into the $SU(5)$ multiplets has strongly supported the idea of the Grand Unified Theory (GUT) for decades. In this paper, we discuss a novel framework which explains why the SM matter fields form the apparently complete $SU(5)$ multiplets. In the new framework, the apparent matter unification inevitably results from chiral $SU(5)$ gauge theory even if the quarks and leptons are not embedded into the common $SU(5)$ multiplets. We call this class of models the "fake GUT". The novel phenomenological prediction of the fake GUT is more variety of the nucleon decay modes than the conventional GUT, which reflects the rich structure of the origin of the matter fields.


title: A roundabout model with on-ramp queues: exact results and scaling approximations

abstract: This paper introduces a general model of a single-lane roundabout, represented as a circular lattice that consists of $L$ cells, with Markovian traffic dynamics. Vehicles enter the roundabout via on-ramp queues that have stochastic arrival processes, remain on the roundabout a random number of cells, and depart via off-ramps. Importantly, the model does not oversimplify the dynamics of traffic on roundabouts, while various performance-related quantities (such as delay and queue length) allow an analytical characterization. In particular, we present an explicit expression for the marginal stationary distribution of each cell on the lattice. Moreover, we derive results that give insight on the dependencies between parts of the roundabout, and on the queue distribution. Finally, we find scaling limits that allow, for every partition of the roundabout in segments, to approximate 1) the joint distribution of the occupation of these segments by a multivariate Gaussian distribution; and 2) the joint distribution of their total queue lengths by a collection of independent Poisson random variables. To verify the scaling limit statements, we develop a novel way to empirically assess convergence in distribution of random variables.


title: A Wind of Change: Detecting and Evaluating Lexical Semantic Change across Times and Domains

abstract: We perform an interdisciplinary large-scale evaluation for detecting lexical semantic divergences in a diachronic and in a synchronic task: semantic sense changes across time, and semantic sense changes across domains. Our work addresses the superficialness and lack of comparison in assessing models of diachronic lexical change, by bringing together and extending benchmark models on a common state-of-the-art evaluation task. In addition, we demonstrate that the same evaluation task and modelling approaches can successfully be utilised for the synchronic detection of domain-specific sense divergences in the field of term extraction.


title: A central limit theorem for the number of descents and some urn models

abstract: The purpose of this work is to establish a central limit theorem that can be applied to a particular form of Markov chains, including the number of descents in a random permutation of $\mathfrak{S}_n$, two-type generalized P{\'o}lya urns, and some other urn models.


title: Femoral fracture load and damage localisation pattern prediction based on a quasi-brittle law : linear and non-linear FE meshing

abstract: Finite element analysis is one of the most used tool for studying femoral neck fracture. Nerveless, consensus concerning either the choice of material characteristics, damage law and /or geometric models (linear on nonlinear) still remains unreached. In this work, we propose a numerical quasi-brittle damage model to describe the behavior of the proximal femur associated with two methods to evaluate the Young modulus. 8 proximal femur finite elements models were constructed from CT scan data (4 donors, 3 men; 1 woman). The results obtained from the numerical computations showed a good agreement between the numerical curves (load-displacement) and the experimental ones. The computed fracture loads were very close to the experimental ones (R 2 =0.825, Relative error =6.49%). The damage patterns were similar to those observed during the failure during sideway fall experimental simulation. Finally, a comparative study based on 32 simulations, using a linear and nonlinear mesh has led to the conclusion that the results are improved when a nonlinear mesh is used. In summary, the numerical quasi-brittle model presented in this work showed its efficiency to find the experimental values during the simulation of the side fall.


title: The future Milky Way and Andromeda galaxy merger

abstract: According to our current knowledge about physical and dynamical properties of the Milky Way-M31 system, it seems likely that these two galaxies will collide and eventually merge in a time very sensitive to initial conditions. Using the HiGPUs code, we have performed several numerical simulations to study the dynamics of the system, trying to define the role of indeterminacy in the present day observed relative velocities of the two galaxies and the time of the merger. At the same time, we have followed the dynamics of the two massive black holes sitting in the galactic centers, to check (within the space and time resolution limits of our simulation) their relative motion upon the completion of the galaxies merger process.


title: Blowup on an arbitrary compact set for a Sch\"odinger equation with nonlinear source term

abstract: We consider the nonlinear Schr\"odinger equation on ${\mathbb R}^N $, $N\ge 1$, \begin{equation*} \partial _t u = i \Delta u + \lambda | u |^\alpha u \quad \mbox{on ${\mathbb R}^N $, $\alpha>0$,} \end{equation*} with $\lambda \in {\mathbb C}$ and $\Re \lambda >0$, for $H^1$-subcritical nonlinearities, i.e. $\alpha >0$ and $(N-2) \alpha < 4$. Given a compact set $K \subset {\mathbb R}^N $, we construct $H^1$ solutions that are defined on $(-T,0)$ for some $T>0$, and blow up on $K $ at $t=0$. The construction is based on an appropriate ansatz. The initial ansatz is simply $U_0(t,x) = ( \Re \lambda )^{- \frac {1} {\alpha }} (-\alpha t + A(x) )^{ -\frac {1} {\alpha } - i \frac {\Im \lambda } {\alpha \Re \lambda } }$, where $A\ge 0$ vanishes exactly on $ K $, which is a solution of the ODE $u'= \lambda | u |^\alpha u$. We refine this ansatz inductively, using ODE techniques. We complete the proof by energy estimates and a compactness argument. This strategy is reminiscent of~[3, 4].


title: Magneto-elasticity on the disk

abstract: A model problem of magneto-elastic body is considered. Specifically, the case of a two dimensional circular disk is studied. The functional which represents the magneto-elastic energy is introduced. Then, the minimisation problem, referring to the simplified two-dimensional model under investigation, is analysed. The existence of a minimiser is proved and its dependence on the eigenvalues of the problem is investigated. A bifurcation result is obtained corresponding to special values of the parameters.


title: The positive geometry for $\phi^{p}$ interactions

abstract: Starting with the seminal work of Arkani-Hamed et al arXiv:1711.09102, in arXiv:1811.05904, the "Amplituhedron program" was extended to analyzing (planar) amplitudes in massless $\phi^{4}$ theory. In this paper we show that the program can be further extended to include $\phi^{p}$ ($p>4$) interactions. We show that tree-level planar amplitudes in these theories can be obtained from geometry of polytopes called accordiohedron which naturally sits inside kinematic space. As in the case of quartic interactions the accordiohedron of a given dimension is not unique, and we show that a weighted sum of residues of the canonical form on these polytopes can be used to compute scattering amplitudes. We finally provide a prescription to compute the weights and demonstrate how it works in various examples.


title: Influence of the electrode nano/microstructure on the electrochemical properties of graphite in aluminum batteries

abstract: Herein we report on a detailed investigation of the irreversible capacity in the first cycle of pyrolytic graphite electrodes in aluminum batteries employing 1-ethyl-3-methylimidazolium chloride:aluminum trichloride (EMIMCl:AlCl3) as electrolyte. The reaction mechanism, involving the intercalation of AlCl4 in graphite, has been fully characterized by correlating the micro/nanostructural modification to the electrochemical performance. To achieve this aim a combination of X-ray diffraction (XRD), small angle X-ray scattering (SAXS) and computed tomography (CT) has been used. The reported results evidence that the irreversibility is caused by a very large decrease in the porosity, which consequently leads to microstructural changes resulting in the trapping of ions in the graphite. A powerful characterization methodology is established, which can also be applied more generally to carbon-based energy-related materials. Introduction


title: Asynchronous Circuits as an Enabler of Scalable And Programmable Metasurfaces

abstract: Metamaterials and metasurfaces have given possibilities for manipulating electromagnetic (EM) waves that in the past would have seemed impossible. The majority of metasurface designs are suitable for a particular frequency and angle of incidence. One long-sought objective is the design of programmable metasurfaces to dynamically manipulate a variety of incoming EM frequencies and angles. In order to do this, a large-scale mesh of networked chips are required below the metasurface, which apart from adapting electrical impedance properties, also communicate with each other, thus relaying information about meta-atom settings, as well as forwarding possible distributed measurements taken. This paper describes why an asynchronous mixed-signal ASIC is advantageous for the control of scalable, EM absorbing, metasurfaces.


title: A local version of the Myers-Steenrod Theorem

abstract: We prove the Myers-Steenrod theorem for local topological groups of isometries acting on pointed $\mathcal{C}^{k,\alpha}$-Riemannian manifolds, with $k+\alpha>0$. As an application, we infer a new regularity result for a certain class of locally homogeneous Riemannian metrics.


title: Learning Representations of Graph Data -- A Survey

abstract: Deep Neural Networks have shown tremendous success in the area of object recognition, image classification and natural language processing. However, designing optimal Neural Network architectures that can learn and output arbitrary graphs is an ongoing research problem. The objective of this survey is to summarize and discuss the latest advances in methods to Learn Representations of Graph Data. We start by identifying commonly used types of graph data and review basics of graph theory. This is followed by a discussion of the relationships between graph kernel methods and neural networks. Next we identify the major approaches used for learning representations of graph data namely: Kernel approaches, Convolutional approaches, Graph neural networks approaches, Graph embedding approaches and Probabilistic approaches. A variety of methods under each of the approaches are discussed and the survey is concluded with a brief discussion of the future of learning representation of graph data.


title: An Artificial Intelligence-Based System for Nutrient Intake Assessment of Hospitalised Patients

abstract: Regular nutrient intake monitoring in hospitalised patients plays a critical role in reducing the risk of disease-related malnutrition (DRM). Although several methods to estimate nutrient intake have been developed, there is still a clear demand for a more reliable and fully automated technique, as this could improve the data accuracy and reduce both the participant burden and the health costs. In this paper, we propose a novel system based on artificial intelligence to accurately estimate nutrient intake, by simply processing RGB depth image pairs captured before and after a meal consumption. For the development and evaluation of the system, a dedicated and new database of images and recipes of 322 meals was assembled, coupled to data annotation using innovative strategies. With this database, a system was developed that employed a novel multi-task neural network and an algorithm for 3D surface construction. This allowed sequential semantic food segmentation and estimation of the volume of the consumed food, and permitted fully automatic estimation of nutrient intake for each food type with a 15% estimation error.


title: Stochastic learning control of inhomogeneous quantum ensembles

abstract: In quantum control, the robustness with respect to uncertainties in the system's parameters or driving field characteristics is of paramount importance and has been studied theoretically, numerically and experimentally. We test in this paper stochastic search procedures (Stochastic gradient descent and the Adam algorithm) that sample, at each iteration, from the distribution of the parameter uncertainty, as opposed to previous approaches that use a fixed grid. We show that both algorithms behave well with respect to benchmarks and discuss their relative merits. In addition the methodology allows to address high dimensional parameter uncertainty; we implement numerically, with good results, a 3D and a 6D case.


title: Realization of Superadiabatic Two-qubit Gates Using Parametric Modulation in Superconducting Circuits

abstract: Fast robust two-qubit gate operation with low susceptibility to crosstalk are the key to scalable quantum information processing. Parametrically driven gate is inherently insensitive to crosstalk while superadiabatic control can speed up the gate without losing accuracy. We propose and experimentally implement superadiabatic two-qubit gates using parametric modulation on superconducting quantum circuits. Our results demonstrate the preservation of adiabaticity at a gate speed close to the quantum limit, in addition to robustness against control instability. We demonstrate a CZ gate with error rate of 5.8$\%$, limited largely by qubit decoherence, promising future improvement and scalable implementation.


title: Topological descriptors of spatial coherence in a convective boundary layer

abstract: The interaction between a turbulent convective boundary layer (CBL) and the underlying land surface is an important research problem in the geosciences. In order to model this interaction adequately, it is necessary to develop tools which can describe it quantitatively. Commonly employed methods, such as bulk flow statistics, are known to be insufficient for this task, especially when land surfaces with equal aggregate statistics but different spatial patterns are involved. While geometrical properties of the surface forcing have a strong influence on flow structure, it is precisely those properties that get neglected when computing bulk statistics. Here, we present a set of descriptors based on low-level topological information (i.\,e. connectivity), and show how these can be used both in the structural analysis of the CBL and in modeling its response to differences in surface forcing. The topological property of connectivity is not only easier to compute than its higher-dimensional homological counterparts, but also has a natural relation to the physical concept of a coherent structure.


title: Detecting Out-of-Distribution Inputs to Deep Generative Models Using Typicality

abstract: Recent work has shown that deep generative models can assign higher likelihood to out-of-distribution data sets than to their training data (Nalisnick et al., 2019; Choi et al., 2019). We posit that this phenomenon is caused by a mismatch between the model's typical set and its areas of high probability density. In-distribution inputs should reside in the former but not necessarily in the latter, as previous work has presumed. To determine whether or not inputs reside in the typical set, we propose a statistically principled, easy-to-implement test using the empirical distribution of model likelihoods. The test is model agnostic and widely applicable, only requiring that the likelihood can be computed or closely approximated. We report experiments showing that our procedure can successfully detect the out-of-distribution sets in several of the challenging cases reported by Nalisnick et al. (2019).


title: Object-Agnostic Suction Grasp Affordance Detection in Dense Cluster Using Self-Supervised Learning.docx

abstract: In this paper we study grasp problem in dense cluster, a challenging task in warehouse logistics scenario. By introducing a two-step robust suction affordance detection method, we focus on using vacuum suction pad to clear up a box filled with seen and unseen objects. Two CNN based neural networks are proposed. A Fast Region Estimation Network (FRE-Net) predicts which region contains pickable objects, and a Suction Grasp Point Affordance network (SGPA-Net) determines which point in that region is pickable. So as to enable such two networks, we design a self-supervised learning pipeline to accumulate data, train and test the performance of our method. In both virtual and real environment, within 1500 picks (~5 hours), we reach a picking accuracy of 95% for known objects and 90% for unseen objects with similar geometry features.


title: Nonparametric volatility change detection

abstract: We consider a nonparametric heteroscedastic time series regression model and suggest testing procedures to detect changes in the conditional variance function. The tests are based on a sequential marked empirical process and thus combine classical CUSUM tests with marked empirical process approaches known from goodness-of-fit testing. The tests are consistent against general alternatives of a change in the conditional variance function, a feature that classical CUSUM tests are lacking. We derive a simple limiting distribution and in the case of univariate covariates even obtain asymptotically distribution-free tests. We demonstrate the good performance of the tests in a simulation study and consider exchange rate data as a real data application.


title: Critical Ambient Pressure and Critical Cooling Rate in Optomechanics of Electromagnetically Levitated Nanoparticles

abstract: The concept of critical ambient pressure is introduced. The particle escapes from its trap when the ambient pressure becomes comparable with or smaller than a critical value, even if the particle motion is cooled by one of the feedback (or cavity) cooling schemes realized so far. The critical ambient pressure may be so small that it is not a limiting factor in ground-state cooling, but critical feedback cooling rates, which are also introduced, are limiting factors. The particle escapes from its trap if any of the feedback cooling rates becomes comparable with or larger than its critical value. Critical feedback cooling rate is different from the well-known manifestation of the measurement noise. The critical feedback cooling rate corresponding to a certain component of the particle motion is usually smaller than the optimum feedback cooling rate at which the standard quantum limit happens unless that component is cooled by the Coulomb force (instead of the optical gradient force). Also, given that the measurement noise for the z component is smaller than the measurement noises for the other two components (assuming that the beam illuminating the particle for photodetection propagates parallel to the z axis), the feedback scheme in which the z component of the particle motion is cooled by the Coulomb force has the best performance. This conclusion is in agreement with the experimental results published after writing the first version of this paper. The dependence of the critical ambient pressure, the critical feedback cooling rates, and the minimum achievable mean phonon numbers on the parameters of the system is derived, and can be verified experimentally. The insights into and the subtle points about the EM force, the EM force fluctuations, and the measurement noise that are presented might be useful in many systems besides those examined here.


title: On Extending the Wireless Communications Range of Weather Stations using LoRaWAN

abstract: Consumer grade weather stations typically involve transmitting sensor information to a digital console that provides readouts of the data being collected. The wireless range of such system is confined to about 100 m, making their use limited to urban environments. We present a device that decodes the data being sent by the weather station and forwards them using the emerging LoRaWAN technology. We designed the device keeping in mind the peculiar conditions of Developing Countries, in particular the low cost and low power requirements. This allows interesting applications in the realm of disaster prevention and mitigation using a network of numerous weather stations.


title: Deep Angular Embedding and Feature Correlation Attention for Breast MRI Cancer Analysis

abstract: Accurate and automatic analysis of breast MRI plays an important role in early diagnosis and successful treatment planning for breast cancer. Due to the heterogeneity nature, accurate diagnosis of tumors remains a challenging task. In this paper, we propose to identify breast tumor in MRI by Cosine Margin Sigmoid Loss (CMSL) with deep learning (DL) and localize possible cancer lesion by COrrelation Attention Map (COAM) based on the learned features. The CMSL embeds tumor features onto a hypersphere and imposes a decision margin through cosine constraints. In this way, the DL model could learn more separable inter-class features and more compact intra-class features in the angular space. Furthermore, we utilize the correlations among feature vectors to generate attention maps that could accurately localize cancer candidates with only image-level label. We build the largest breast cancer dataset involving 10,290 DCE-MRI scan volumes for developing and evaluating the proposed methods. The model driven by CMSL achieved classification accuracy of 0.855 and AUC of 0.902 on the testing set, with sensitivity and specificity of 0.857 and 0.852, respectively, outperforming other competitive methods overall. In addition, the proposed COAM accomplished more accurate localization of the cancer center compared with other state-of-the-art weakly supervised localization method.


title: Structural study of analogues of Titan s haze by trapped ion mobility coupled with a Fourier transform ion cyclotron mass spectrometer

abstract: The aerosols present in the atmosphere of the Saturn s moon Titan are of particular planetary science interest and several spacecraft missions already allowed to gather spectroscopic data. Titan haze s analogs, so-called tholins, were produced on earth to push forward the comprehension of their formation and properties. In this study, this highly complex mixture was analyzed here for the first time by trapped ion mobility spectrometry coupled to ultra-high resolution mass spectrometry (FTICR MS). Electrospray ionization revealed the characteristic CHNx-class components, with CHN5-6 and DBE 6-7 most abundant. Deploying specialized visualization, enabled by accurate mass measurements and elemental composition assignments, the adapted Kendrick mass defect analysis highlights the C2H3N homolog series, whereas the nitrogen-modified van Krevelen diagram exhibits a clear trend towards H/C 1.5 and N/C 0.5. More interestingly, the representation of m/z versus collision cross section (CCS) allowed hypothesizing a ramified N-PAH structural motif. State-of-the-art IMS is currently not able to resolve the isomeric continuum of ultra-complex mixtures; thus peak parameter other than the CCS-value are explored. As such, analyzing the mobility peak width versus m/z shows a linear increase in isomeric diversity between m/z 170 and 350 and a near plateau in diversity at higher m/z for the N-PAH-like structure. Due to the high complexity of the sample, these structural insights are only to be revealed by TIMS-FTICR MS.


title: Online Graph-Based Change-Point Detection for High Dimensional Data

abstract: Online change-point detection (OCPD) is important for application in various areas such as finance, biology, and the Internet of Things (IoT). However, OCPD faces major challenges due to high-dimensionality, and it is still rarely studied in literature. In this paper, we propose a novel, online, graph-based, change-point detection algorithm to detect change of distribution in low- to high-dimensional data. We introduce a similarity measure, which is derived from the graph-spanning ratio, to test statistically if a change occurs. Through numerical study using artificial online datasets, our data-driven approach demonstrates high detection power for high-dimensional data, while the false alarm rate (type I error) is controlled at a nominal significant level. In particular, our graph-spanning approach has desirable power with small and multiple scanning window, which allows timely detection of change-point in the online setting.


title: Temporal evolution and correlations of optical activity indicators measured in Sun-as-a-star observations

abstract: (Abridged) We perform a detailed study of the main optical activity indicators (Ca II H & K, Balmer lines, Na I D$_{\rm 1}$ D$_{\rm 2}$, and He I D$_{\rm 3}$) measured for the Sun using the data provided by the HARPS-N solar-telescope feed at the Telescopio Nazionale Galileo. The value of the solar rotation period is found in all the activity indicators, with the only exception being H$\delta$. The derived values vary from 26.29 days (H$\gamma$ line) to 31.23 days (He I). From an analysis of sliding periodograms we find that in most of the activity indicators the spectral power is split into several "bands" of periods around 26 and 30 days, that might be explained by the migration of active regions between the equator and a latitude of $\sim$ 30$^{\circ}$, spot evolution or a combination of both effects. In agreement with previous works a typical lifetime of active regions of $\sim$ ten rotation periods is inferred from the pooled variance diagrams. We find that H$\alpha$, H$\beta$, H$\gamma$, H$\epsilon$, and He I show a significant correlation with the S index. Significant correlations between the contrast, bisector span, and the heliocentric radial velocity with the activity indexes are also found. We show that the full width at half maximum, the bisector, and the disc-integrated magnetic field correlate with the radial velocity variations. The correlation of the S index and H$\alpha$ changes with time, increasing with larger sun spot numbers and solar irradiance. A similar tendency with the S index - radial velocity correlation is also present in the data. Our results are consistent with a scenario in which higher activity favours the correlation between the S index and the H$\alpha$ activity indicators and between the S index and radial velocity variations.


title: Strategy for enhanced thermoelectric performance of Bi2S3 nanorods by Bi nanoinclusions

abstract: This is the first report on the enhanced thermoelectric (TE) properties of novel Bi2S3-Bi nanocomposites synthesized using a one-step polyol method at different reaction temperatures (TRe) and time. They are well-characterized as nanorod-composites, coexistent with orthorhombic Bi2S3 and rhombohedral Bi phases together in which the latter coats the former forming Bi2S3-Bi core-shell type structures along with independent Bi nanoparticles (NPs). There is a very significant observation of systematic reduction in electri-cal resistivity \r{ho} with reaction temperature and time duration increase, revealing a promising approach for reduction of \r{ho} in this highly resistive Bi2S3 and hence resolving the earlier obstacles for its thermoelectric application potentials for the past few decades. Most astonishingly, TE power factor at 300 K of highest Bi content nanocomposite pellet, made at 27 oC using ~900 MPa pressure, is 3 orders of magnitude greater than that of hot-pressed Bi2S3, or even 23% better than that of spark plasma-sintered core-shell Bi2S3@Bi sample reported earlier (Tarachand et al. Nano Res. 2016, 9, 3291; Ge et al. ACS Appl. Mater. Interfaces 2017, 9, 4828). Considering the probable greatly reduced thermal conductivity due to their complex nanostructures, the significantly improved TE performance potential near 300 K is highly anticipated for these toxic- and rare earth element-free TE nanocomposites, making the present synthesis method as a pioneering approach for developing enhanced thermoelectric properties of Bi2S3-based materials without using extra sintering steps.


title: Levitons in superconducting point contacts

abstract: We investigate the transport properties of a superconducting quantum point contact in the presence of an arbitrary periodic drive. In particular, we calculate the dc current and noise in the tunnel limit, obtaining general expressions in terms of photoassisted probabilities. Interesting features can be observed when the frequency is comparable to the gap. Here, we show that quantized Lorentzian pulses minimize the excess noise, further strengthening the hierarchy among different periodic drives observed in the electron quantum optics domain. In this regime, the excess noise is directly connected to the overlap between electron and hole energy distributions driven out of equilibrium by the applied voltage. In the adiabatic limit, where the frequency of the drive is very small compared to the superconducting gap, we recover the conventional Shapiro-spikes physics in the supercurrent.


title: Giant oscillator strength in the band-edge light absorption of zincblende, chalcopyrite and kesterite solar cell materials

abstract: In semiconducting solar-cell absorbers, high absorption coefficient (alpha) near the band-edge region is critical to maximize the photocurrent generation and collection. Nevertheless, despite the importance of the band-edge absorption characteristics, the quantitative analysis of the band-edge optical transitions has not been performed. In this study, we have implemented systematic density functional theory (DFT) calculation, focusing on the band-edge oscillator strength of seven practical solar cell absorbers (GaAs, InP, CdTe, CuInSe2, CuGaSe2, Cu2ZnSnSe4, and Cu2ZnSnS4) with zincblende, chalcopyrite and kesterite structures. We find that all these crystals exhibit the giant oscillator strength near the band gap region, revealing the fact that alpha in the band gap region is enhanced significantly by the anomalous high oscillator strength. In high-energy optical transitions, however, the oscillator strength reduces sharply and the absorption properties are determined primarily by the joint density-of-state contribution. Based on DFT results, we show that the giant oscillator strength in the band edge region originates from a unique tetrahedral-bonding structure, with a negligible effect of constituent atoms.


title: Reconstruction and Membership Inference Attacks against Generative Models

abstract: We present two information leakage attacks that outperform previous work on membership inference against generative models. The first attack allows membership inference without assumptions on the type of the generative model. Contrary to previous evaluation metrics for generative models, like Kernel Density Estimation, it only considers samples of the model which are close to training data records. The second attack specifically targets Variational Autoencoders, achieving high membership inference accuracy. Furthermore, previous work mostly considers membership inference adversaries who perform single record membership inference. We argue for considering regulatory actors who perform set membership inference to identify the use of specific datasets for training. The attacks are evaluated on two generative model architectures, Generative Adversarial Networks (GANs) and Variational Autoencoders (VAEs), trained on standard image datasets. Our results show that the two attacks yield success rates superior to previous work on most data sets while at the same time having only very mild assumptions. We envision the two attacks in combination with the membership inference attack type formalization as especially useful. For example, to enforce data privacy standards and automatically assessing model quality in machine learning as a service setups. In practice, our work motivates the use of GANs since they prove less vulnerable against information leakage attacks while producing detailed samples.


title: On the Compositionality Prediction of Noun Phrases using Poincar\'e Embeddings

abstract: The compositionality degree of multiword expressions indicates to what extent the meaning of a phrase can be derived from the meaning of its constituents and their grammatical relations. Prediction of (non)-compositionality is a task that has been frequently addressed with distributional semantic models. We introduce a novel technique to blend hierarchical information with distributional information for predicting compositionality. In particular, we use hypernymy information of the multiword and its constituents encoded in the form of the recently introduced Poincar\'e embeddings in addition to the distributional information to detect compositionality for noun phrases. Using a weighted average of the distributional similarity and a Poincar\'e similarity function, we obtain consistent and substantial, statistically significant improvement across three gold standard datasets over state-of-the-art models based on distributional information only. Unlike traditional approaches that solely use an unsupervised setting, we have also framed the problem as a supervised task, obtaining comparable improvements. Further, we publicly release our Poincar\'e embeddings, which are trained on the output of handcrafted lexical-syntactic patterns on a large corpus.


title: RankQA: Neural Question Answering with Answer Re-Ranking

abstract: The conventional paradigm in neural question answering (QA) for narrative content is limited to a two-stage process: first, relevant text passages are retrieved and, subsequently, a neural network for machine comprehension extracts the likeliest answer. However, both stages are largely isolated in the status quo and, hence, information from the two phases is never properly fused. In contrast, this work proposes RankQA: RankQA extends the conventional two-stage process in neural QA with a third stage that performs an additional answer re-ranking. The re-ranking leverages different features that are directly extracted from the QA pipeline, i.e., a combination of retrieval and comprehension features. While our intentionally simple design allows for an efficient, data-sparse estimation, it nevertheless outperforms more complex QA systems by a significant margin: in fact, RankQA achieves state-of-the-art performance on 3 out of 4 benchmark datasets. Furthermore, its performance is especially superior in settings where the size of the corpus is dynamic. Here the answer re-ranking provides an effective remedy against the underlying noise-information trade-off due to a variable corpus size. As a consequence, RankQA represents a novel, powerful, and thus challenging baseline for future research in content-based QA.


title: Pressure-robustness in quasi-optimal a priori estimates for the Stokes problem

abstract: Recent analysis of the divergence constraint in the incompressible Stokes/Navier--Stokes problem has stressed the importance of equivalence classes of forces and how it plays a fundamental role for an accurate space discretization. Two forces in the momentum balance are velocity--equivalent if they lead to the same velocity solution, i.e., if and only if the forces differ by only a gradient field. Pressure-robust space discretizations are designed to respect these equivalence classes. One way to achieve pressure-robust schemes is to introduce a non-standard discretization of the right-side forcing term for any inf-sup stable mixed finite element method. This modification leads to pressure-robust and optimal-order discretizations, but a proof was only available for smooth situations and remained open in the case of minimal regularity, where it cannot be assumed that the vector Laplacian of the velocity is at least square-integrable. This contribution closes this gap by delivering a general estimate for the consistency error that depends only on the regularity of the data term. Pressure-robustness of the estimate is achieved by the fact that the new estimate only depends on the $L^2$ norm of the Helmholtz--Hodge projector of the data term and not on the $L^2$ norm of the entire data term. Numerical examples illustrate the theory.


title: Stability of Euler-Lagrange type cubic functional equations in quasi-Banach spaces

abstract: In this paper, we study the generalized Hyers-Ulam stability of Euler-Lagrange type cubic functional equation of the form \begin{align*} 2mf(x + my) + 2f(mx - y) = (m^3 + m)[f(x+ y) + f(x - y)] + 2(m^4 - 1)f(y) \end{align*} for all $x,y \in X$, where $m$ is a fixed scalar such that $m \neq 0,1$, and $f$ is a map from a quasi-normed space $X$ to a quasi-Banach space $Y$ over the same field with $X$ by applying the alternative fixed point theorem.


title: Global a priori bounds for weak solutions of quasilinear elliptic systems with nonlinear boundary condition

abstract: In this paper we study quasilinear elliptic systems with nonlinear boundary condition with fully coupled perturbations even on the boundary. Under very general assumptions our main result says that each weak solution of such systems belongs to $L^\infty(\close)\times L^\infty(\close)$. The proof is based on Moser's iteration scheme. The results presented here can also be applied to elliptic systems with homogeneous Dirichlet boundary condition.


title: Deep Learning For Experimental Hybrid Terrestrial and Satellite Interference Management

abstract: Interference Management is a vast topic present in many disciplines. The majority of wireless standards suffer the drawback of interference intrusion and the network efficiency drop due to that. Traditionally, interference management has been addressed by proposing signal processing techniques that minimize their effects locally. However, the fast evolution of future communications makes difficult to adapt to new era. In this paper we propose the use of Deep Learning techniques to present a compact system for interference management. In particular, we describe two subsystems capable to detect the presence of interference, even in high Signal to Interference Ratio (SIR), and interference classification in several radio standards. Finally, we present results based on real signals captured from terrestrial and satellite networks and the conclusions unveil the courageous future of AI and wireless communications.


title: Magneto-spectroscopy of exciton Rydberg states in a CVD grown WSe2 monolayer

abstract: The results of magneto-optical spectroscopy investigations of excitons in a CVD grown monolayer of WSe2 encapsulated in hexagonal boron nitride are presented. The emission linewidth for the 1s state is of 4:7 meV, close to the narrowest emissions observed in monolayers exfoliated from bulk material. The 2s excitonic state is also observed at higher energies in the photoluminescence spectrum. Magneto-optical spectroscopy allows for the determination of the g-factors and of the spatial extent of the excitonic wave functions associated with these emissions. Our work establishes CVD grown monolayers of transition metal dichalcogenides as a mature technology for optoelectronic applications.


title: Van der Waals solid phase epitaxy to grow large-area manganese-doped MoSe$_2$ few-layers on SiO$_2$/Si

abstract: Large-area growth of continuous transition metal dichalcogenides (TMDCs) layers is a prerequisite to transfer their exceptional electronic and optical properties into practical devices. It still represents an open issue nowadays. Electric and magnetic doping of TMDC layers to develop basic devices such as p-n junctions or diluted magnetic semiconductors for spintronic applications are also an important field of investigation. Here, we have developed two different techniques to grow MoSe$_2$ mono- and multi-layers on SiO$_2$/Si substrates over large areas. First, we co-deposited Mo and Se atoms on SiO$_2$/Si by molecular beam epitaxy in the van der Waals regime to obtain continuous MoSe$_2$ monolayers over 1 cm$^2$. To grow MoSe$_2$ multilayers, we then used the van der Waals solid phase epitaxy which consists in depositing an amorphous Se/Mo bilayer on top of a co-deposited MoSe$_2$ monolayer which serves as a van der Waals growth template. By annealing, we obtained continuous MoSe$_2$ multilayers over 1 cm$^2$. Moreover, by inserting a thin layer of Mn in the stack, we could demonstrate the incorporation of up to 10 \% of Mn in MoSe$_2$ bilayers.


title: Primordial density fluctuations generated by wormholes

abstract: We studied the influence of a wormhole existing in the expanding Universe and passing through the horizon volume on the energy density of the Universe. The two-point correlation function of a free massless scalar field mimicking the inflaton was found. The revealed violation of the translation invariance during the process in question might be potentially envisaged in the anisotropy in cosmic microwave background radiation map.


title: A comparative study between two models of active cluster-crystals

abstract: We study a system of active particles with soft repulsive interactions that lead to an active cluster-crystal phase in two dimensions. We use two different modelizations of the active force - Active Brownian particles (ABP) and Ornstein-Uhlenbeck particles (AOUP) - and focus on analogies and differences between them. We study the different phases appearing in the system, in particular, the formation of ordered patterns drifting in space without being altered. We develop an effective description which captures some properties of the stable clusters for both ABP and AOUP. As an additional point, we confine such a system in a large channel, in order to study the interplay between the cluster crystal phase and the well-known accumulation near the walls, a phenomenology typical of active particles. For small activities, we find clusters attached to the walls and deformed, while for large values of the active force they collapse in stripes parallel to the walls.


title: Making sense of the divergent series for reconstructing a Hamiltonian from its eigenstates and eigenvalues

abstract: In quantum mechanics the eigenstates of the Hamiltonian form a complete basis. However, physicists conventionally express completeness as a formal sum over the eigenstates, and this sum is typically a divergent series if the Hilbert space is infinite dimensional. Furthermore, while the Hamiltonian can be reconstructed formally as a sum over its eigenvalues and eigenstates, this series is typically even more divergent. For the simple cases of the square-well and the harmonic-oscillator potentials this paper explains how to use the elementary procedure of Euler summation to sum these divergent series and thereby to make sense of the formal statement of the completeness of the formal sum that represents the reconstruction of the Hamiltonian.


title: Learning Software Configuration Spaces: A Systematic Literature Review

abstract: Most modern software systems (operating systems like Linux or Android, Web browsers like Firefox or Chrome, video encoders like ffmpeg, x264 or VLC, mobile and cloud applications, etc.) are highly-configurable. Hundreds of configuration options, features, or plugins can be combined, each potentially with distinct functionality and effects on execution time, security, energy consumption, etc. Due to the combinatorial explosion and the cost of executing software, it is quickly impossible to exhaustively explore the whole configuration space. Hence, numerous works have investigated the idea of learning it from a small sample of configurations' measurements. The pattern "sampling, measuring, learning" has emerged in the literature, with several practical interests for both software developers and end-users of configurable systems. In this survey, we report on the different application objectives (e.g., performance prediction, configuration optimization, constraint mining), use-cases, targeted software systems and application domains. We review the various strategies employed to gather a representative and cost-effective sample. We describe automated software techniques used to measure functional and non-functional properties of configurations. We classify machine learning algorithms and how they relate to the pursued application. Finally, we also describe how researchers evaluate the quality of the learning process. The findings from this systematic review show that the potential application objective is important; there are a vast number of case studies reported in the literature from the basis of several domains and software systems. Yet, the huge variant space of configurable systems is still challenging and calls to further investigate the synergies between artificial intelligence and software engineering.


title: Visual Person Understanding through Multi-Task and Multi-Dataset Learning

abstract: We address the problem of learning a single model for person re-identification, attribute classification, body part segmentation, and pose estimation. With predictions for these tasks we gain a more holistic understanding of persons, which is valuable for many applications. This is a classical multi-task learning problem. However, no dataset exists that these tasks could be jointly learned from. Hence several datasets need to be combined during training, which in other contexts has often led to reduced performance in the past. We extensively evaluate how the different task and datasets influence each other and how different degrees of parameter sharing between the tasks affect performance. Our final model matches or outperforms its single-task counterparts without creating significant computational overhead, rendering it highly interesting for resource-constrained scenarios such as mobile robotics.


title: Numerical algorithm for the space-time fractional Fokker-Planck system with two internal states

abstract: The fractional Fokker-Planck system with multiple internal states is derived in [Xu and Deng, Math. Model. Nat. Phenom., $\mathbf{13}$, 10 (2018)], where the space derivative is Laplace operator. If the jump length distribution of the particles is power law instead of Gaussian, the space derivative should be replaced with fractional Laplacian. This paper focuses on solving the two state Fokker-Planck system with fractional Laplacian. We first provide a priori estimate for this system under different regularity assumptions on the initial data. Then we use $L_1$ scheme to discretize the time fractional derivatives and finite element method to approximate the fractional Laplacian operators. Furthermore, we give the error estimates for the space semidiscrete and fully discrete schemes without any assumption on regularity of solutions. Finally, the effectiveness of the designed scheme is verified by numerical experiments.


title: Convergence in variation for the multidimensional generalized sampling series and applications to smoothing for digital image processing

abstract: In this paper we study the problem of the convergence in variation for the generalized sampling series based upon averaged-type kernels in the multidimensional setting. As a crucial tool, we introduce a family of operators of sampling-Kantorovich type for which we prove convergence in L^p on a subspace of L^p(R^N): therefore we obtain the convergence in variation for the multidimensional generalized sampling series by means of a relation between the partial derivatives of such operators acting on an absolutely continuous function f and the sampling-Kantorovich type operators acting on the partial derivatives of f. Applications to digital image processing are also furnished.


title: Active inference body perception and action for humanoid robots

abstract: Providing artificial agents with the same computational models of biological systems is a way to understand how intelligent behaviours may emerge. We present an active inference body perception and action model working for the first time in a humanoid robot. The model relies on the free energy principle proposed for the brain, where both perception and action goal is to minimise the prediction error through gradient descent on the variational free energy bound. The body state (latent variable) is inferred by minimising the difference between the observed (visual and proprioceptive) sensor values and the predicted ones. Simultaneously, the action makes sensory data sampling to better correspond to the prediction made by the inner model. We formalised and implemented the algorithm on the iCub robot and tested in 2D and 3D visual spaces for online adaptation to visual changes, sensory noise and discrepancies between the model and the real robot. We also compared our approach with classical inverse kinematics in a reaching task, analysing the suitability of such a neuroscience-inspired approach for real-world interaction. The algorithm gave the robot adaptive body perception and upper body reaching with head object tracking (toddler-like), and was able to incorporate visual features online (in a closed-loop manner) without increasing the computational complexity. Moreover, our model predicted involuntary actions in the presence of sensorimotor conflicts showing the path for a potential proof of active inference in humans.


title: Aging two-state process with L\'{e}vy walk and Brownian motion

abstract: With the rich dynamics studies of single-state processes, the two-state processes attract more and more interests of people, since they are widely observed in complex system and have effective applications in diverse fields, say, foraging behavior of animals. This report builds the theoretical foundation of the process with two states: L\'{e}vy walk and Brownian motion, having been proved to be an efficient intermittent search process. The sojourn time distributions in two states are both assumed to be heavy-tailed with exponents $\alpha_\pm\in(0,2)$. The dynamical behaviors of this two-state process are obtained through analyzing the ensemble-averaged and time-averaged mean squared displacements (MSDs) in weak and strong aging cases. It is discovered that the magnitude relationship of $\alpha_\pm$ decides the fraction of two states for long times, playing a crucial role in these MSDs. According to the generic expressions of MSDs, some inherent characteristics of the two-state process are detected. The effects of the fraction on these observables are detailedly presented in six different cases. The key of getting these results is to calculate the velocity correlation function of the two-state process, the techniques of which can be generalized to other multi-state processes.


title: Chauffeuring a Crashed Robot from a Disk

abstract: Evacuation of robots from a disk has attained a lot of attention recently. We visit the problem from the perspective of fault-tolerance. We consider two robots trying to evacuate from a disk via a single hidden exit on the perimeter of the disk. The robots communicate wirelessly. The robots are susceptible to crash faults after which they stop moving and communicating. We design the algorithms for tolerating one fault. The objective is to minimize the worst-case time required to evacuate both the robots from the disk. When the non-faulty robot chauffeurs the crashed robot, it takes $\alpha \geq 1$ amount of time to travel unit distance. With this, we also provide a lower bound for the evacuation time. Further, we evaluate the worst-case of the algorithms for different values of $\alpha$ and the crash time.


title: Cosmology in the presence of multiple light moduli

abstract: The generic expectation in string/supergravity models is that there are multiple moduli fields with masses of the order of the supersymmetry breaking scale. We study the cosmology that arises as a result of vacuum misalignment of these moduli fields (in contrast to previous studies which mostly focussed on the single modulus case). We show that the dark radiation produced from the heavier moduli undergoes significant dilution. This happens even if there is a small splitting between the masses of the lightest and the heavier moduli. On the other hand, in the absence of fast annihilation processes decay of heavier moduli generically leads to overproduction of dark matter. We discuss a scenario where the problem can be addressed with a prompt dark matter annihilation to dark radiation. This can lead to realistic dark matter abundances, and the additional dark radiation produced as a result of this mechanism undergoes sufficient dilution as long as the annihilation is prompt.


title: Dynamics of vertically and horizontally transmitted parasites: Continuous vs Discrete Models

abstract: In this paper we analyze a continuous-time epidemic model and its discrete counterpart, where infection spreads both horizontally and vertically. We consider three cases: model with horizontal and imperfect vertical transmissions, model with horizontal and perfect vertical transmissions, and model with perfect vertical and no horizontal transmissions. Stability of different equilibrium points of both the continuous and discrete systems in all cases are determined. It is shown that the stability criteria are identical for continuous and discrete systems. The dynamics of the discrete system have also shown to be independent of the step-size. Numerical computations are presented to illustrate analytical results of both the systems and their subsystems.


title: CrossFill: Foam Structures with Graded Density for Continuous Material Extrusion

abstract: The fabrication flexibility of 3D printing has sparked a lot of interest in designing structures with spatially graded material properties. In this paper, we propose a new type of density graded structure that is particularly designed for 3D printing systems based on filament extrusion. In order to ensure high-quality fabrication results, extrusion-based 3D printing requires not only that the structures are self-supporting, but also that extrusion toolpaths are continuous and free of self-overlap. The structure proposed in this paper, called CrossFill, complies with these requirements. In particular, CrossFill is a self-supporting foam structure, for which each layer is fabricated by a single, continuous and overlap-free path of material extrusion. Our method for generating CrossFill is based on a space-filling surface that employs spatially varying subdivision levels. Dithering of the subdivision levels is performed to accurately reproduce a prescribed density distribution. We demonstrate the effectiveness of CrossFill on a number of experimental tests and applications.


title: Automatic Reparameterisation of Probabilistic Programs

abstract: Probabilistic programming has emerged as a powerful paradigm in statistics, applied science, and machine learning: by decoupling modelling from inference, it promises to allow modellers to directly reason about the processes generating data. However, the performance of inference algorithms can be dramatically affected by the parameterisation used to express a model, requiring users to transform their programs in non-intuitive ways. We argue for automating these transformations, and demonstrate that mechanisms available in recent modeling frameworks can implement non-centring and related reparameterisations. This enables new inference algorithms, and we propose two: a simple approach using interleaved sampling and a novel variational formulation that searches over a continuous space of parameterisations. We show that these approaches enable robust inference across a range of models, and can yield more efficient samplers than the best fixed parameterisation.


title: Tunable dual-comb from an all-polarization-maintaining single-cavity dual-color Yb:fiber laser

abstract: We demonstrate dual-comb generation from an all-polarization-maintaining dual-color ytterbium (Yb) fiber laser. Two pulse trains with center wavelengths at 1030 nm and 1060 nm respectively are generated within the same laser cavity with a repetition rate around 77 MHz. Dual-color operation is induced using a tunable mechanical spectral filter, which cuts the gain spectrum into two spectral regions that can be independently mode-locked. Spectral overlap of the two pulse trains is achieved outside the laser cavity by amplifying the 1030-nm pulses and broadening them in a nonlinear fiber. Spatially overlapping the two arms on a simple photodiode then generates a down-converted radio frequency comb. The difference in repetition rates between the two pulse trains and hence the line spacing of the down-converted comb can easily be tuned in this setup. This feature allows for a flexible adjustment of the tradeoff between non-aliasing bandwidth vs. measurement time in spectroscopy applications. Furthermore, we show that by fine-tuning the center-wavelengths of the two pulse trains, we are able to shift the down-converted frequency comb along the radio-frequency axis. The usability of this dual-comb setup is demonstrated by measuring the transmission of two different etalons while the laser is completely free-running.


title: Long-lived heavy particles in neutrino mass models

abstract: All extensions of the standard model that generate Majorana neutrino masses at the electro-weak scale introduce some "heavy" mediators, either fermions and/or scalars, weakly coupled to leptons. Here, by "heavy" we understand implicitly the mass range between a few 100 GeV up to, say, roughly 2 TeV, such that these particles can be searched for at the LHC. We study decay widths of these mediators for several different tree-level neutrino mass models. The models we consider range from the simplest $d=5$ seesaw up to $d=11$ neutrino mass models. For each of the models we identify the most interesting parts of the parameter space, where the heavy mediator fields are particularly long-lived and can decay with experimentally measurable decay lengths. One has to distinguish two different scenarios, depending on whether fermions or scalars are the lighter of the heavy particles. For fermions we find that the decay lengths correlate with the inverse of the overall neutrino mass scale. Thus, since no lower limit on the lightest neutrino mass exists, nearly arbitrarily long decay lengths can be obtained for the case where fermions are the lighter of the heavy particles. For charged scalars, on the other hand, there exists a maximum value for the decay length. This maximum value depends on the model and on the electric charge of the scalar under consideration, but can at most be of the order of a few millimeters. Interestingly, independent of the model, this maximum occurs always in a region of parameter space, where leptonic and gauge boson final states have similar branching ratios, i.e. where the observation of lepton number violating final states from scalar decays is possible.


title: Sensor properties of Pd doped SnO2 nanofiber enshrouded with functionalized MWCNT

abstract: In this work, tin oxide (SnO2)/multi-walled carbon nanotube (MWCNT) composite based ethanol sensor that exhibits fast response/recovery behaviour, large sensitivity, and good selectivity was demonstrated. First, Pd doped SnO2 (SnO2-Pd) nanofibers was prepared on the interdigitated electrodes (IDE) using electrospinning technique, followed by calcination at 600 0C for 2 h. Then, carboxylic acid modified multi-walled carbon nanotube (MWCNT-COOH) was dropped on the nanofibers and allowed to dry at RT. Next, the thin films were characterized by field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and thermogravimetric analysis (TGA). Finally, chemical sensing behaviors of the sensors were analyzed against to ethanol (ETH), toluene (TOL), trichloroethylene (TCE), acetone (ACE) and binary mixing with water. It was demonstrated that increasing the temperature and gas concentration has led to increased sensor response for SnO2-Pd nanofiber system. However, there was no general rule found for MWCNT-COOH coated SnO2-Pd nanofiber system. A novel sensing mechanism was offered for the composite structure.


title: Scale Factors of Homogeneous Anisotropic Cosmological Models with Perfect Fluid

abstract: The article is devoted to cosmology. It deals with homogeneous anisotropic cosmological models. Scale factors have been evaluated for the multicomponent models with perfect fluid, taking account of its expansion, rotation and shear. The cosmological fluid components are as follows: phantom matter, de Sitter vacuum, domain walls, strings, dust, radiation, perfect gas, stiff matter and ekpyrotic matter. The scale factor dependences on the equation of state and kinematic invariants of the perfect fluid have been analysed. The paper is aimed at finding exact solutions of Friedmann and Raychaudhuri equations for different combination of matter components and kinematic invariants.


title: Context-driven Active and Incremental Activity Recognition

abstract: Human activity recognition based on mobile device sensor data has been an active research area in mobile and pervasive computing for several years. While the majority of the proposed techniques are based on supervised learning, semi-supervised approaches are being considered to significantly reduce the size of the training set required to initialize the recognition model. These approaches usually apply self-training or active learning to incrementally refine the model, but their effectiveness seems to be limited to a restricted set of physical activities. We claim that the context which surrounds the user (e.g., semantic location, proximity to transportation routes, time of the day) combined with common knowledge about the relationship between this context and human activities could be effective in significantly increasing the set of recognized activities including those that are difficult to discriminate only considering inertial sensors, and the ones that are highly context-dependent. In this paper, we propose CAVIAR, a novel hybrid semi-supervised and knowledge-based system for real-time activity recognition. Our method applies semantic reasoning to context data to refine the prediction of a semi-supervised classifier. The context-refined predictions are used as new labeled samples to update the classifier combining self-training and active learning techniques. Results on a real dataset obtained from 26 subjects show the effectiveness of the context-aware approach both on the recognition rates and on the number of queries to the subjects generated by the active learning module. In order to evaluate the impact of context reasoning, we also compare CAVIAR with a purely statistical version, considering features computed on context data as part of the machine learning process.


title: Reconfigurable Electromagnetic Structures: X-Band and Beyond

abstract: Developing reconfigurable millimeter-wave (mmWave) antennas and devices is an outstanding challenge, with switch technologies being a primary impediment. Recently, it has been shown that vanadium dioxide (VO2), a thermochromic material whose resistance changes with temperature, could provide a path forward in developing reconfigurable mmWave devices. As an initial step towards this vision, we investigate the integration of VO2 switches in reconfigurable components at 15 GHz. In particular, a frequency reconfigurable antenna and a reconfigurable phase shifter are shown. The low loss and minimal parasitics of VO2 technology have the potential to enable devices at 15 GHz and beyond.


title: The Impact of the Fiducial Cosmology Assumption on BAO Cosmological Parameter Inference

abstract: Standard analysis pipelines for measurements of Baryon Acoustic Oscillations (BAO) in galaxy surveys make use of a fiducial cosmological model to guide the data compression required to transform from observed redshifts and angles to the measured angular and radial BAO peak positions. In order to remove any dependence on the fiducial cosmology from the results, all models compared to the data should mimic the compression and its dependence on the fiducial model. In practice, approximations are made when testing models: (1) There is assumed to be no residual dependence on the fiducial cosmology after reconstruction, (2) differences in the distance--redshift relationship are assumed to match a linear scaling, and (3) differences in clustering between true and fiducial models are assumed to be removed by the free parameters used to null the non-BAO signal. We test these approximations using the current standard measurement procedure with a set of halo catalogs from the {\sc Aemulus} suite of $N$-body simulations, which span a range of $w\mathrm{CDM}$ cosmological models. We focus on reconstruction of the primordial BAO and locating the BAO. For the range of $w\mathrm{CDM}$ cosmologies covered by the {\sc Aemulus} suite, we find no evidence for systematic errors in the measured BAO shift parameters $\alpha_{\parallel}$ and $\alpha_{\bot}$ to $< 0.1\%$. However, the measured errors $\sigma_{\alpha_{\parallel}}$ and $\sigma_{\alpha_{\bot}}$ show a notable absolute increase by up to $+0.001$ and $+0.002$ respectively in the case that the fiducial cosmology does not match the truth. These effects on the inferred BAO scale will be important given the precision of measurements expected from future surveys including DESI, Euclid, and WFIRST.


title: Naturalness as a reasonable scientific principle in fundamental physics

abstract: I aim to clarify the physical content and significance of naturalness. Physicists' earliest understanding of naturalness, as an autonomy of scales (AoS) requirement provides the most cogent definition of naturalness and I will assert that i) this provides a uniform notion which undergirds a myriad prominent naturalness conditions, ii) this is a reasonable criterion to impose on EFTs and iii) the successes and violations of naturalness are best understood when adhering to this notion of naturalness. I argue that this principle is neither an aesthetic nor a sociologically-influenced principle. I contend that naturalness may only be plausibly argued to be an aesthetic/sociological principle when formal measures of naturalness and their use in physics communities are conflated with the central dogma of naturalness - the former may indeed be argued to be sociologically-influenced and somewhat arbitrary - but these formal measures of naturalness are in fact less successful than AoS naturalness. I put forward arguments as to why AoS naturalness is well-defined and why it was reasonable for physicists to endorse this naturalness principle on both theoretical and empirical grounds. Up to date, no compelling reasons have appeared as to why the laws of nature should generically decoupling into quasi-autonomous physical domains. A decoupling of scales in the quantum realm is often claimed to be entailed by the Decoupling Theorem (Cao and Schweber (1993)), yet I will show that this theorem is too weak to underwrite quasi-autonomous physical domains in quantum field theories because one should additionally impose that parameters be natural. Violations of naturalness would then have ontological import - unnatural parameters would not be accurately described by EFTs but rather by field theories exhibiting some kind of UV/IR interplay.


title: Argus: Smartphone-enabled Human Cooperation via Multi-Agent Reinforcement Learning for Disaster Situational Awareness

abstract: Argus exploits a Multi-Agent Reinforcement Learning (MARL) framework to create a 3D mapping of the disaster scene using agents present around the incident zone to facilitate the rescue operations. The agents can be both human bystanders at the disaster scene as well as drones or robots that can assist the humans. The agents are involved in capturing the images of the scene using their smartphones (or on-board cameras in case of drones) as directed by the MARL algorithm. These images are used to build real time a 3D map of the disaster scene. Via both simulations and real experiments, an evaluation of the framework in terms of effectiveness in tracking random dynamicity of the environment is presented.


title: A Generative Framework for Zero-Shot Learning with Adversarial Domain Adaptation

abstract: We present a domain adaptation based generative framework for zero-shot learning. Our framework addresses the problem of domain shift between the seen and unseen class distributions in zero-shot learning and minimizes the shift by developing a generative model trained via adversarial domain adaptation. Our approach is based on end-to-end learning of the class distributions of seen classes and unseen classes. To enable the model to learn the class distributions of unseen classes, we parameterize these class distributions in terms of the class attribute information (which is available for both seen and unseen classes). This provides a very simple way to learn the class distribution of any unseen class, given only its class attribute information, and no labeled training data. Training this model with adversarial domain adaptation further provides robustness against the distribution mismatch between the data from seen and unseen classes. Our approach also provides a novel way for training neural net based classifiers to overcome the hubness problem in zero-shot learning. Through a comprehensive set of experiments, we show that our model yields superior accuracies as compared to various state-of-the-art zero shot learning models, on a variety of benchmark datasets. Code for the experiments is available at github.com/vkkhare/ZSL-ADA


title: Coherent Point Drift Networks: Unsupervised Learning of Non-Rigid Point Set Registration

abstract: Given new pairs of source and target point sets, standard point set registration methods often repeatedly conduct the independent iterative search of desired geometric transformation to align the source point set with the target one. This limits their use in applications to handle the real-time point set registration with large volume dataset. This paper presents a novel method, named coherent point drift networks (CPD-Net), for the unsupervised learning of geometric transformation towards real-time non-rigid point set registration. In contrast to previous efforts (e.g. coherent point drift), CPD-Net can learn displacement field function to estimate geometric transformation from a training dataset, consequently, to predict the desired geometric transformation for the alignment of previously unseen pairs without any additional iterative optimization process. Furthermore, CPD-Net leverages the power of deep neural networks to fit an arbitrary function, that adaptively accommodates different levels of complexity of the desired geometric transformation. Particularly, CPD-Net is proved with a theoretical guarantee to learn a continuous displacement vector function that could further avoid imposing additional parametric smoothness constraint as in previous works. Our experiments verify the impressive performance of CPD-Net for non-rigid point set registration on various 2D/3D datasets, even in the presence of significant displacement noise, outliers, and missing points. Our code will be available at https://github.com/nyummvc/CPD-Net.


title: FASTER: Fusion AnalyticS for public Transport Event Response

abstract: Increasing urban concentration raises operational challenges that can benefit from integrated monitoring and decision support. Such complex systems need to leverage the full stack of analytical methods, from state estimation using multi-sensor fusion for situational awareness, to prediction and computation of optimal responses. The FASTER platform that we describe in this work, deployed at nation scale and handling 1.5 billion public transport trips a year, offers such a full stack of techniques for this large-scale, real-time problem. FASTER provides fine-grained situational awareness and real-time decision support with the objective of improving the public transport commuter experience. The methods employed range from statistical machine learning to agent-based simulation and mixed-integer optimization. In this work we present an overview of the challenges and methods involved, with details of the commuter movement prediction module, as well as a discussion of open problems.


title: Is the Cosmological Constant of Topological Origin?

abstract: The observed value of the cosmological constant poses large theoretical problems. We find that topology of the Universe provides a natural source for it. Restricting dynamically an Einstein-Cartan gravity to General Relativity in our observed Universe allows topological invariants to induce an effective cosmological constant from dynamical quintessence-like topological fields. Its evaluation through the boundary of black holes yields a range compatible with the observed value, with uncertainty of three orders of magnitude. In turns, it provides a measurement of the Universe's isoperimetric constant.


title: Closed-loop adaptive control of extreme events in a turbulent flow

abstract: Extreme events that arise spontaneously in chaotic dynamical systems often have an adverse impact on the system or the surrounding environment. As such, their mitigation is highly desirable. Here, we introduce a novel control strategy for mitigating extreme events in a turbulent shear flow. The controller combines a probabilistic prediction of the extreme events with a deterministic actuator. The predictions are used to actuate the controller only when an extreme event is imminent. When actuated, the controller only acts on the degrees of freedom that are involved in the formation of the extreme events, exerting minimal interference with the flow dynamics. As a result, the attractors of the controlled and uncontrolled systems share the same chaotic core (containing the non-extreme events) and only differ in the tail of their distributions. We propose that such adaptive low-dimensional controllers should be used to mitigate extreme events in general chaotic dynamical systems, beyond the shear flow considered here.