error_id
stringlengths 4
72
| id
int64 1
2.75k
| error_code
stringlengths 7
44
| description
stringlengths 3
414
|
|---|---|---|---|
ERROR_USER_PROFILE_LOAD | 245 | 500 (0x1F4) | User profile cannot be loaded. |
ERROR_ARITHMETIC_OVERFLOW | 246 | 534 (0x216) | Arithmetic result exceeded 32 bits. |
ERROR_PIPE_CONNECTED | 247 | 535 (0x217) | There is a process on other end of the pipe. |
ERROR_PIPE_LISTENING | 248 | 536 (0x218) | Waiting for a process to open the other end of the pipe. |
ERROR_VERIFIER_STOP | 249 | 537 (0x219) | Application verifier has found an error in the current process. |
ERROR_ABIOS_ERROR | 250 | 538 (0x21A) | An error occurred in the ABIOS subsystem. |
ERROR_WX86_WARNING | 251 | 539 (0x21B) | A warning occurred in the WX86 subsystem. |
ERROR_WX86_ERROR | 252 | 540 (0x21C) | An error occurred in the WX86 subsystem. |
ERROR_TIMER_NOT_CANCELED | 253 | 541 (0x21D) | An attempt was made to cancel or set a timer that has an associated APC and the subject thread is not the thread that originally set the timer with an associated APC routine. |
ERROR_UNWIND | 254 | 542 (0x21E) | Unwind exception code. |
ERROR_BAD_STACK | 255 | 543 (0x21F) | An invalid or unaligned stack was encountered during an unwind operation. |
ERROR_INVALID_UNWIND_TARGET | 256 | 544 (0x220) | An invalid unwind target was encountered during an unwind operation. |
ERROR_INVALID_PORT_ATTRIBUTES | 257 | 545 (0x221) | Invalid Object Attributes specified to NtCreatePort or invalid Port Attributes specified to NtConnectPort |
ERROR_PORT_MESSAGE_TOO_LONG | 258 | 546 (0x222) | Length of message passed to NtRequestPort or NtRequestWaitReplyPort was longer than the maximum message allowed by the port. |
ERROR_INVALID_QUOTA_LOWER | 259 | 547 (0x223) | An attempt was made to lower a quota limit below the current usage. |
ERROR_DEVICE_ALREADY_ATTACHED | 260 | 548 (0x224) | An attempt was made to attach to a device that was already attached to another device. |
ERROR_INSTRUCTION_MISALIGNMENT | 261 | 549 (0x225) | An attempt was made to execute an instruction at an unaligned address and the host system does not support unaligned instruction references. |
ERROR_PROFILING_NOT_STARTED | 262 | 550 (0x226) | Profiling not started. |
ERROR_PROFILING_NOT_STOPPED | 263 | 551 (0x227) | Profiling not stopped. |
ERROR_COULD_NOT_INTERPRET | 264 | 552 (0x228) | The passed ACL did not contain the minimum required information. |
ERROR_PROFILING_AT_LIMIT | 265 | 553 (0x229) | The number of active profiling objects is at the maximum and no more may be started. |
ERROR_CANT_WAIT | 266 | 554 (0x22A) | Used to indicate that an operation cannot continue without blocking for I/O. |
ERROR_CANT_TERMINATE_SELF | 267 | 555 (0x22B) | Indicates that a thread attempted to terminate itself by default (called NtTerminateThread with NULL) and it was the last thread in the current process. |
NULL | 268 | ERROR_UNEXPECTED_MM_CREATE_ERR | 556 (0x22C) |
ERROR_UNEXPECTED_MM_CREATE_ERR | 269 | 556 (0x22C) | If an MM error is returned which is not defined in the standard FsRtl filter, it is converted to one of the following errors which is guaranteed to be in the filter. In this case information is lost, however, the filter correctly handles the exception. |
ERROR_UNEXPECTED_MM_MAP_ERROR | 270 | 557 (0x22D) | If an MM error is returned which is not defined in the standard FsRtl filter, it is converted to one of the following errors which is guaranteed to be in the filter. In this case information is lost, however, the filter correctly handles the exception. |
ERROR_UNEXPECTED_MM_EXTEND_ERR | 271 | 558 (0x22E) | If an MM error is returned which is not defined in the standard FsRtl filter, it is converted to one of the following errors which is guaranteed to be in the filter. In this case information is lost, however, the filter correctly handles the exception. |
ERROR_BAD_FUNCTION_TABLE | 272 | 559 (0x22F) | A malformed function table was encountered during an unwind operation. |
ERROR_NO_GUID_TRANSLATION | 273 | 560 (0x230) | Indicates that an attempt was made to assign protection to a file system file or directory and one of the SIDs in the security descriptor could not be translated into a GUID that could be stored by the file system. This causes the protection attempt to fail, which may cause a file creation attempt to fail. |
ERROR_INVALID_LDT_SIZE | 274 | 561 (0x231) | Indicates that an attempt was made to grow an LDT by setting its size, or that the size was not an even number of selectors. |
ERROR_INVALID_LDT_OFFSET | 275 | 563 (0x233) | Indicates that the starting value for the LDT information was not an integral multiple of the selector size. |
ERROR_INVALID_LDT_DESCRIPTOR | 276 | 564 (0x234) | Indicates that the user supplied an invalid descriptor when trying to set up Ldt descriptors. |
ERROR_TOO_MANY_THREADS | 277 | 565 (0x235) | Indicates a process has too many threads to perform the requested action. For example, assignment of a primary token may only be performed when a process has zero or one threads. |
ERROR_THREAD_NOT_IN_PROCESS | 278 | 566 (0x236) | An attempt was made to operate on a thread within a specific process, but the thread specified is not in the process specified. |
ERROR_PAGEFILE_QUOTA_EXCEEDED | 279 | 567 (0x237) | Page file quota was exceeded. |
ERROR_LOGON_SERVER_CONFLICT | 280 | 568 (0x238) | The Netlogon service cannot start because another Netlogon service running in the domain conflicts with the specified role. |
ERROR_SYNCHRONIZATION_REQUIRED | 281 | 569 (0x239) | The SAM database on a Windows Server is significantly out of synchronization with the copy on the Domain Controller. A complete synchronization is required. |
ERROR_NET_OPEN_FAILED | 282 | 570 (0x23A) | The NtCreateFile API failed. This error should never be returned to an application, it is a place holder for the Windows Lan Manager Redirector to use in its internal error mapping routines. |
ERROR_IO_PRIVILEGE_FAILED | 283 | 571 (0x23B) | {Privilege Failed} The I/O permissions for the process could not be changed. |
ERROR_CONTROL_C_EXIT | 284 | 572 (0x23C) | {Application Exit by CTRL+C} The application terminated as a result of a CTRL+C. |
ERROR_MISSING_SYSTEMFILE | 285 | 573 (0x23D) | {Missing System File} The required system file %hs is bad or missing. |
ERROR_UNHANDLED_EXCEPTION | 286 | 574 (0x23E) | {Application Error} The exception %s (0x%08lx) occurred in the application at location 0x%08lx. |
ERROR_APP_INIT_FAILURE | 287 | 575 (0x23F) | {Application Error} The application was unable to start correctly (0x%lx). Click OK to close the application. |
ERROR_PAGEFILE_CREATE_FAILED | 288 | 576 (0x240) | {Unable to Create Paging File} The creation of the paging file %hs failed (%lx). The requested size was %ld. |
ERROR_INVALID_IMAGE_HASH | 289 | 577 (0x241) | Windows cannot verify the digital signature for this file. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. |
ERROR_NO_PAGEFILE | 290 | 578 (0x242) | {No Paging File Specified} No paging file was specified in the system configuration. |
ERROR_ILLEGAL_FLOAT_CONTEXT | 291 | 579 (0x243) | {EXCEPTION} A real-mode application issued a floating-point instruction and floating-point hardware is not present. |
ERROR_NO_EVENT_PAIR | 292 | 580 (0x244) | An event pair synchronization operation was performed using the thread specific client/server event pair object, but no event pair object was associated with the thread. |
ERROR_DOMAIN_CTRLR_CONFIG_ERROR | 293 | 581 (0x245) | A Windows Server has an incorrect configuration. |
ERROR_ILLEGAL_CHARACTER | 294 | 582 (0x246) | An illegal character was encountered. For a multi-byte character set this includes a lead byte without a succeeding trail byte. For the Unicode character set this includes the characters 0xFFFF and 0xFFFE. |
ERROR_UNDEFINED_CHARACTER | 295 | 583 (0x247) | The Unicode character is not defined in the Unicode character set installed on the system. |
ERROR_FLOPPY_VOLUME | 296 | 584 (0x248) | The paging file cannot be created on a floppy diskette. |
ERROR_BIOS_FAILED_TO_CONNECT_INTERRUPT | 297 | 585 (0x249) | The system BIOS failed to connect a system interrupt to the device or bus for which the device is connected. |
ERROR_BACKUP_CONTROLLER | 298 | 586 (0x24A) | This operation is only allowed for the Primary Domain Controller of the domain. |
ERROR_MUTANT_LIMIT_EXCEEDED | 299 | 587 (0x24B) | An attempt was made to acquire a mutant such that its maximum count would have been exceeded. |
ERROR_FS_DRIVER_REQUIRED | 300 | 588 (0x24C) | A volume has been accessed for which a file system driver is required that has not yet been loaded. |
ERROR_CANNOT_LOAD_REGISTRY_FILE | 301 | 589 (0x24D) | {Registry File Failure} The registry cannot load the hive (file): %hs or its log or alternate. It is corrupt, absent, or not writable. |
ERROR_DEBUG_ATTACH_FAILED | 302 | 590 (0x24E) | {Unexpected Failure in DebugActiveProcess} An unexpected failure occurred while processing a DebugActiveProcess API request. You may choose OK to terminate the process, or Cancel to ignore the error. |
DebugActiveProcess | 303 | ERROR_SYSTEM_PROCESS_TERMINATED | 591 (0x24F) |
ERROR_SYSTEM_PROCESS_TERMINATED | 304 | 591 (0x24F) | {Fatal System Error} The %hs system process terminated unexpectedly with a status of 0x%08x (0x%08x 0x%08x). The system has been shut down. |
ERROR_DATA_NOT_ACCEPTED | 305 | 592 (0x250) | {Data Not Accepted} The TDI client could not handle the data received during an indication. |
ERROR_VDM_HARD_ERROR | 306 | 593 (0x251) | NTVDM encountered a hard error. |
ERROR_DRIVER_CANCEL_TIMEOUT | 307 | 594 (0x252) | {Cancel Timeout} The driver %hs failed to complete a cancelled I/O request in the allotted time. |
ERROR_REPLY_MESSAGE_MISMATCH | 308 | 595 (0x253) | {Reply Message Mismatch} An attempt was made to reply to an LPC message, but the thread specified by the client ID in the message was not waiting on that message. |
ERROR_LOST_WRITEBEHIND_DATA | 309 | 596 (0x254) | {Delayed Write Failed} Windows was unable to save all the data for the file %hs. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere. |
ERROR_CLIENT_SERVER_PARAMETERS_INVALID | 310 | 597 (0x255) | The parameter(s) passed to the server in the client/server shared memory window were invalid. Too much data may have been put in the shared memory window. |
ERROR_NOT_TINY_STREAM | 311 | 598 (0x256) | The stream is not a tiny stream. |
ERROR_STACK_OVERFLOW_READ | 312 | 599 (0x257) | The request must be handled by the stack overflow code. |
ERROR_CONVERT_TO_LARGE | 313 | 600 (0x258) | Internal OFS status codes indicating how an allocation operation is handled. Either it is retried after the containing onode is moved or the extent stream is converted to a large stream. |
ERROR_FOUND_OUT_OF_SCOPE | 314 | 601 (0x259) | The attempt to find the object found an object matching by ID on the volume but it is out of the scope of the handle used for the operation. |
ERROR_ALLOCATE_BUCKET | 315 | 602 (0x25A) | The bucket array must be grown. Retry transaction after doing so. |
ERROR_MARSHALL_OVERFLOW | 316 | 603 (0x25B) | The user/kernel marshalling buffer has overflowed. |
ERROR_INVALID_VARIANT | 317 | 604 (0x25C) | The supplied variant structure contains invalid data. |
ERROR_BAD_COMPRESSION_BUFFER | 318 | 605 (0x25D) | The specified buffer contains ill-formed data. |
ERROR_AUDIT_FAILED | 319 | 606 (0x25E) | {Audit Failed} An attempt to generate a security audit failed. |
ERROR_TIMER_RESOLUTION_NOT_SET | 320 | 607 (0x25F) | The timer resolution was not previously set by the current process. |
ERROR_INSUFFICIENT_LOGON_INFO | 321 | 608 (0x260) | There is insufficient account information to log you on. |
ERROR_BAD_DLL_ENTRYPOINT | 322 | 609 (0x261) | {Invalid DLL Entrypoint} The dynamic link library %hs is not written correctly. The stack pointer has been left in an inconsistent state. The entrypoint should be declared as WINAPI or STDCALL. Select YES to fail the DLL load. Select NO to continue execution. Selecting NO may cause the application to operate incorrectly. |
ERROR_BAD_SERVICE_ENTRYPOINT | 323 | 610 (0x262) | {Invalid Service Callback Entrypoint} The %hs service is not written correctly. The stack pointer has been left in an inconsistent state. The callback entrypoint should be declared as WINAPI or STDCALL. Selecting OK will cause the service to continue operation. However, the service process may operate incorrectly. |
ERROR_IP_ADDRESS_CONFLICT1 | 324 | 611 (0x263) | There is an IP address conflict with another system on the network. |
ERROR_IP_ADDRESS_CONFLICT2 | 325 | 612 (0x264) | There is an IP address conflict with another system on the network. |
ERROR_REGISTRY_QUOTA_LIMIT | 326 | 613 (0x265) | {Low On Registry Space} The system has reached the maximum size allowed for the system part of the registry. Additional storage requests will be ignored. |
ERROR_NO_CALLBACK_ACTIVE | 327 | 614 (0x266) | A callback return system service cannot be executed when no callback is active. |
ERROR_PWD_TOO_SHORT | 328 | 615 (0x267) | The password provided is too short to meet the policy of your user account. Please choose a longer password. |
ERROR_PWD_TOO_RECENT | 329 | 616 (0x268) | The policy of your user account does not allow you to change passwords too frequently. This is done to prevent users from changing back to a familiar, but potentially discovered, password. If you feel your password has been compromised then please contact your administrator immediately to have a new one assigned. |
ERROR_PWD_HISTORY_CONFLICT | 330 | 617 (0x269) | You have attempted to change your password to one that you have used in the past. The policy of your user account does not allow this. Please select a password that you have not previously used. |
ERROR_UNSUPPORTED_COMPRESSION | 331 | 618 (0x26A) | The specified compression format is unsupported. |
ERROR_INVALID_HW_PROFILE | 332 | 619 (0x26B) | The specified hardware profile configuration is invalid. |
ERROR_INVALID_PLUGPLAY_DEVICE_PATH | 333 | 620 (0x26C) | The specified Plug and Play registry device path is invalid. |
ERROR_QUOTA_LIST_INCONSISTENT | 334 | 621 (0x26D) | The specified quota list is internally inconsistent with its descriptor. |
ERROR_EVALUATION_EXPIRATION | 335 | 622 (0x26E) | {Windows Evaluation Notification} The evaluation period for this installation of Windows has expired. This system will shutdown in 1 hour. To restore access to this installation of Windows, please upgrade this installation using a licensed distribution of this product. |
ERROR_ILLEGAL_DLL_RELOCATION | 336 | 623 (0x26F) | {Illegal System DLL Relocation} The system DLL %hs was relocated in memory. The application will not run properly. The relocation occurred because the DLL %hs occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL. |
ERROR_DLL_INIT_FAILED_LOGOFF | 337 | 624 (0x270) | {DLL Initialization Failed} The application failed to initialize because the window station is shutting down. |
ERROR_VALIDATE_CONTINUE | 338 | 625 (0x271) | The validation process needs to continue on to the next step. |
ERROR_NO_MORE_MATCHES | 339 | 626 (0x272) | There are no more matches for the current index enumeration. |
ERROR_RANGE_LIST_CONFLICT | 340 | 627 (0x273) | The range could not be added to the range list because of a conflict. |
ERROR_SERVER_SID_MISMATCH | 341 | 628 (0x274) | The server process is running under a SID different than that required by client. |
ERROR_CANT_ENABLE_DENY_ONLY | 342 | 629 (0x275) | A group marked use for deny only cannot be enabled. |
ERROR_FLOAT_MULTIPLE_FAULTS | 343 | 630 (0x276) | {EXCEPTION} Multiple floating point faults. |
ERROR_FLOAT_MULTIPLE_TRAPS | 344 | 631 (0x277) | {EXCEPTION} Multiple floating point traps. |